Author Archive: admin

Rigging Foreman (Lifting Equipments) – Qatar

A Rigging Foreman (Lifting Equipments) assumes high level of responsibility for the safe handling around 5000 nos. of Onshore Lifting Equipment’s Proof load testing and certification ( Includes tools and tackles, Powered & Non-Powered Equipments, EOT Cranes & Hoists, Plant Elevators). He has to work with limited supervision and should be able to coordinate with vendors & contractors for safe, timely and cost effective execution of jobs, perform site visits for the notified maintenance jobs and verify the application of established terms and condition from the contract for the jobs being executed. Ensuring work compliance to the standards, tolerances and fits. Accountabilities include to plan, execute, maintain and supervise the Lifting Equipments maintenance and certification activities in Company facilities. Also to interface, guide & direct the maintenance contractors / Company staff for preventive maintenance and corrective maintenance activities and Third Party certifying agencies. HND or Equivalent in Mechanical discipline, Minimum of 7 years of experience in lifting equipment maintenance activities and coordination for inspection, 3rd Party certification in onshore / offshore oil and gas industries. At least 5 years Middle East experience preferable, Good Knowledge related to operation, maintenance and statuary testing / inspection of lifting equipment. Familiar with international lifting equipment standards and codes. Abilities in troubleshooting, correspondence and follow-up with vendors, contractors, QG teams (Maintenance, Operations, Supply and E&V). Effective written & oral skills in English. Good communication skills and computer skills in MS office and SAP. Position requires planning and man-management skills. Capability to solve more complex problems and ability to work under pressure.

Refractory Insulation Supervisor – Qatar

Specific Role Purpose: Refractory/Insulation Supervisor (Fabric Maintenance Supervisor) is to manage established contracts, quantity estimation and active participation in the procurement of refractory /insulation materials on time, and safe execution of work at site with contracted manpower. He is to handle the demand of Refractory lining maintenance activity as follows, identification of required materials on time to order, coordination with vendor & contractor for safe, timely and cost effective execution.
He will be responsible to supervise the Maintenance work, including check and verification of drawings & details, specification requirements, preparing the Method Statement, JSA, work execution and management of works to minimize the cost of Maintenance activities, follow maintenance procedures continuously to ensure maximum operational efficiency. Specific Accountabilities:
Supervises and coordinates works according to established procedures, policies and approved programs. With these parameters, exercises judgment in planning and organizing work, deciding immediate priorities, setting standards, checking and accepting work. Job includes regular maintenance, planning for the shutdown, timely completion with safety and quality, prepare and submit reports. Technical Bid Evaluation for all materials and contracts.
Specific Requirements (Technical Competency): HND or Bachelor degree or equivalent in Ceramic Engineering with specialization in Refractory. Overall 15 + years’ experience in the refractory line, with minimum 5 years’ experience in refractory installation & repair works in the Oil & Gas in the supervisory position with maintenance and shut down experience. Familiar with International standards. Gulf experience is preferred. Good spoken English, ability to write technical reports. Computer literature, shall be able perform MS office, internet and basic computer applications. Ability to read refractory design drawings.

Rover Operator (Jetties) – Qatar

Rover Operator (Jetties)
Rover Operators (Jetties) (Ras Laffan Terminal Operation Department) – Required Key Skills:
Experience in the field of Oil & Gas or Petrochemical industry handling Tank Farm Storage and Loading Jetty facilities of the products: LPG, Naphtha, Diesel, Kero-Jet, Base Oil, Field Condensate etc. At least 6 years in a similar Oil and Gas processing facility in LNG plant, LPG Plant, Refinery, Gas Treatment Plant, Olefin Plant, Sulfur forming, Storage and Loading facilities and Terminal Operations in the same position. Minimum Requirements: The successful candidate must have a Secondary education or Higher National Diploma / NCVT or equivalent followed by 1 year formal plant training in job related area together with a minimum of 6 to 8 years working experience in the field of Oil & Gas or Petrochemical industry handling Tank Farm Storage and Loading Jetty facilities of the products: LPG, Naphtha, Diesel, Kero-Jet, Base Oil, Field Condensate etc. At least 2 years in a similar oil and gas processing facility in LNG plant, LPG Plant, Refinery, Gas Treatment Plant, Olefin Plant, Sulfur forming, Storage and Loading facilities and Terminal Operations in the same position.
Excellent spoken and written English language skills and computer knowledge are essential.
Must be able to communicate in English Language, with clarity through all means of communication channels including plant’s Ultra-High Frequency (UHF) and Very High Frequency (VHF) radio networks.

Systems Analyst I (Security) – Qatar

Recognizes successful intrusions and compromises through review and analysis of relevant event detail information.
Responsible for working in a rotational 24×7 Security Operation Center (SOC) environment.Knowledge in the following: Firewalls, Intrusion detection and prevention systems, anti-virus and content filtering, URL filtering, authentication solutions, switches, routers, VoIP, DMZ.
Launch and track investigations to resolve, recognizes attacks based on their signatures. Differentiates false positives from true intrusion attempts.
Alerts clients of intrusions and potential intrusions and compromises to their network infrastructure. Remotely monitor and manage client network security devices. Actively investigates the latest in security vulnerabilities, advisories, incidents, and penetration techniques and notifies clients when appropriate. Performs tasks as identified in a daily task list. Conduct periodic Vulnerability Assessment and Reporting.
Configuration Review of security devices.
Publish weekly reports to applicable teams.
Generate daily/weekly/monthly reports on SOC activity.
3-5 years of progressive, security-related experience.
Minimum of 3 year SOC experience.
Experience with Security Information & Event management (SIEM) tools.
Incident Handling and Incident Response experience.
Excellent vulnerability assessment experience.
Bachelors degree or equivalent.
Very good English language skills (spoken & written).
This position requires the ability to work a shift schedule
Strong interpersonal and communication skills, the ability to work effectively in situations involving uncertainty or lack of information.

Head of Planning & Well Performance – Qatar

Lead, execute and maintain well surveillance and performance processes that lead to identify risk and opportunities. Forecast and plan production/injection from Qatargas wells/reservoirs to LNG plant to meet Company targets. 1. Ensure participation in studies related to well performance and provide validated data and information in a timely manner.2. Determine production requirements for field development to maintain volume deliverability at target rates while optimizing recovery of reserves. Identifies threats for improving production performance or addition of gas capacity from the existing production block.3. Ensure processes are in place to identify production shortfalls and analyse their origin in order to find counter-measures. 4. Advise whether additional data acquisitions are required and directs special studies/analysis to understand production performance abnormalities. Collaborates with various technical teams to include issues in studies related to wells/reservoir impacting production performance. 5. Ensure programs, procedures and tools are available to complete production surveillance and performance reviews. 6. Lead upstream gas production volume planning by initiating input gathering from functional planners in line with annual corporate planning cycle.7. Ensure completeness of input data and correct estimation of feedgas from wells to LNG trains.8. Coordinate integration and optimization of the multi-disciplinary activity plans in order to maximize the business outcomes (Gas Production and Reserves) within the resource constraints (Opex, Capex, onshore/offshore resources).9. Wellsite visits required both Offshore and Onshore (90% in the office and 10% at well site).
9 years’ experience in Production Engineering/ studies in the oil and/or gas industry, 5 years in well performance reviews, surveillance and gas production planning. 2 years’ experience in supervising engineering teams.
Experience in the use of industry standard tools for well modelling, database and planning. Knowledge and understanding of Production Engineering disciplines, Oil & Gas reservoir behaviour, injection aquifers. Well production, well test analysis and predictions, volume planning and integration.
Understanding of flow assurance integrity, plant operations, well designs, well work and reservoir modelling.
Experience of various software and tools used in E&P industry (Prosper, GAP, OFM, Volume planning, EC).
Proficient in written and spoken English.
Very good computer literacy (Excel, macros, words, MS Project and PowerPoint)
Well-developed interpersonal skills with the ability to communicate with several organisational levels.
Requires strong analytical, project planning and organisational skills.

Reservoir Engineer – Qatar

Participates in reservoir engineering studies, reservoir performance synthesis studies, Production Logging (PL) and Pressure Transient Analysis (PTA) synthesis or reservoir surveillance data acquisition.1. Designs and interprets pressure transient tests, production logging data, production tests and interference tests and provides final reports.2. Integrates the data from the above tests into a field wide picture showing the reservoir quality, reservoir pressure depletion and reservoir behaviour.3. Utilise reservoir engineering techniques & tools (interpretations, logs, thermodynamics etc.) in line with industry best practice.4. Provides support to the reservoir management of the Qatargas operating assets and wastewater injection reservoirs & wells. 5. Support opportunities for reservoir engineering to develop / maintain / optimize / maximize life of the reservoir for long-term benefit of the company.6. Maintains and update of dynamic reservoir simulations, including all available well results and surveillance conclusions. Contribute to the achievement of the production forecast evaluation. 7. Contribute on developing the reservoir surveillance plan in conjunction with the production performance engineering and well engineering and intervention divisions.. Perform the interpretation and integration of the data acquisitions in a consistent way.8. Provide Reservoir Engineering support for preparation and follow up of drilling, (re) completions or work over operations and subsurface projects.9. Participate in surveillance reports, preparation for shareholder workshops and data management efforts related to subsurface.
Bachelors Degree in Petroleum Engineering or equivalent.
Minimum 5 years’ experience in reservoir engineeringKnowledge and understanding of the following Reservoir Engineering disciplines: Pressure Transient Analysis, Production Log Interpretation, Material Balance, Nodal Analysis and Injection Well performance.Familiar in Production Operation, Drilling and Completions and Well-Work.Proficient in written and spoken EnglishComputer literacy (Excel and PowerPoint)Well-developed interpersonal skills with the ability to communicate at several levels.Strong analytical, planning and organisational skills.

Control & Instrumentation Engineer – Qatar

Basic Function and Scope: The Control & Instrumentation (C&I) Engineer supports the Project Management Team (PMT) during FEED as well as detailed engineering, construction, commissioning and start up phases of the Project. Ensure that the C&I design and installation meet the Project safety, environmental, operational, quality, cost, design, and schedule objectives. An ability to work in a multi-disciplinary team is required as well as strong computer literacy. Tasks and Duties:• Responsible for control system design for the facilities and ensures that the work is executed in a coordinated way to meet the project objectives and the plant can be operated and controlled with minimum operator intervention. • Facilitate and coordinate all C&I design, detailed engineering and construction work related to the project to adhere to project schedule. Evaluate/comment work performed by the Contractor and sub-contractors to insure that the work is being executed in accordance with project specifications, company standards, and regulatory requirements. Includes review of C&I design drawings, documents, and specifications. Steward C&I engineering queries from the Contractor and sub-contractors as well as technical information requests.• Identify and assess deviations to Contract Technical Specifications and regulatory requirements; ensure that such deviations will be processed according to project procedures. • Participate and contribute in project design reviews, HAZID, HAZOP, SIL reviews. Participate in C&I engineering 3D model reviews and design reviews. • Conduct meetings with the contractor and vendors to ensure smooth progress of control and instrument activities. Conduct project team member briefing sessions with respect to C&I engineering requirements and processes. Coordinate owner and PMT C&I engineering portions of design reviews including 3D model review to minimize disruption of the contractor’s work.• Directs and oversees the activities of inspection, monitoring and certifying the quality of instruments and equipment and project installations. Reviews inspection programs, inspections, FAT and SAT on systems and components related to control and instrument function. • Steward the process of capturing and communicate C&I engineering and design lessons learned for the project.• Support Engineering Manager in stewarding the contractor’s activities with respect to C&I engineering execution to ensure that all relevant parties are familiar with engineering execution plans, procedures, objectives, and overall job requirements, contractor staffs the project with adequate numbers of qualified personnel, contractor employs the appropriate design tools, including computer hardware and software, contractor adheres to all appropriate specifications and standards, contractor provides all engineering deliverables, commissioning and 2-year operations spares as per contract. Minimum Requirements:
• Bachelor of Science degree in Electronics/Instrumentation Engineering• Minimum 15 years’ experience in the oil and gas/petrochemical industry with at least 5 years of experience in projects.• Excellent understanding of Process Plant Control requirements.• Excellent written and verbal communication skills• Computer/IT literate.

Senior Plant Safety Officer – Qatar

Ensure the implementation of SEQ programs to provide a safe and enviornmentally compliant work enviornment for Qatargas and contractor personnel in all onshore and offshore locations and assist in the supervision of Technicians and Trainees.
1. Coordinate and plan the activities of SEQ personnel in order to provide for the delivery of approved SEQ programs.
2. Develop, recommend and conduct training programs in safety principles and practices.
3. Ensure the effectiveness and on demand use of SEQ equipment and facilities are kept in best working condition by coordinating and monitoring preventive maintenance programs in order to ensure optimum operational status and readiness for use.
4. Coordinate the implementation of the “permit to work”, covering hote maintenance work and vessel entry procedures.
5. Act as a source of guidance in investigating incidents and participate in the preparation, review and assesment of statictics.
6. Inspect new projects construction/installation work to ensure contractor personnel are aware of, and comply with Qatargas SEQ practices and regulations.
7. Ensure that adequate stocks of SEQ related and emergency equipment and protective clothing are equipoped at all times.

Business Continuity Management Specialist – Qatar

Job Purpose:To lead and supervise the ongoing maintenance and enhancement of the corporate Business Continuity Management (BCM) program, ensuring it is fully embedded and integrated in the organization. This is a key role in ensuring that Qatargas remains a risk aware and resilient organisation.
Key Accountabilities:Lead the maintenance and continuous improvement of BCM, including -• Coordinate the implementation of various business continuity strategies owned by different entities in Qatargas.• Lead the periodic review and update of business impact assessments.• Manage the update of key documentation such as department business continuity plans.• Design and facilitate exercises to test departmental business continuity plans and capture lessons learnt. • Work closely with emergency response teams to jointly design and conduct major incident response exercises incorporating the business continuity response.• Identify, train and guide departmental business continuity management coordinators to enhance BCM culture and competencies across the organisation.• Support / collaborate with the enterprise risk management program to ensure close alignment / integration between risk mitigation and business continuity.• Design and deliver appropriate level of reports for Qatargas senior management and shareholders.• Represent Qatargas at stakeholder / shareholder committee meetings. Minimum Requirements: • Bachelor’s degree in a technical discipline such as Business, Economics or Engineering.• Post Graduate degree would be desirable. • Minimum of 8-10 years’ experience in business continuity preferably within the oil and gas, engineering, process or manufacturing industries• Minimum 5 years’ experience in risk management (coupled with or in addition to the above) • Minimum 6 years’ experience in workshop facilitation and training • Preference for professional qualifications in business continuity (e.g CBCI) or risk management (e.g CIRM, DIRM)• Expert knowledge of the Business Continuity Management standards and practices, e.g. ISO22301.

Completions Engineer – Qatar

Basic Function and Scope:The Completions Engineer executes the integrated systems completions/start-up program. Between the Construction and Operations phases, he manages effective execution systems completions/acceptance tasks and identification/mitigation of “look ahead” activities critical to ensuring an orderly integration of Producing Facilities. Provides guidance, training, and oversight regarding systems completions to the Qatargas PMT Start-Up Organization and Contractor’s Systems Completion Organization. Tasks and Duties:• Assist in the development and sourcing of the Systems Completions Organization.• Assist development of the Systems Completions Plan.• Manages a computerized Completion Management System (CMS) for tracking, certification, and quality purposes. Develop and monitor systems completions database of engineering parameters, check sheets, and verification criteria.• Involve Operation representatives in all aspects of familiarization and training on plant equipment and systems according to the requirements the Operability Management Plan.• Under auspices of the Systems Completions and working with the EPC contractors’ manage to:1. Provide onsite leadership to ensuring safe execution systems completions and commissioning.2. Provide guidance and participate in activities concerning Mechanical Completion, Pre-commissioning, Commissioning and Turnover of equipment and systems.3. Development of Completions Management Procedures and functional and inspection checks, startup and operating, loop testing, Permit to Work (PTW), and preparation of Completion Dossiers, etc.4. Execute SAT/FAT plan5. Assist Systems Completion acceptance processes including punch list activities.6. Provide commissioning input for Safety and Operability reviews.7. Review Startup and Operating manuals and spares.8. Develop interface/transition to steady state operations. 9. Ensure commissioning procedures, work packs, and Turnover and Completion Packages (TCP’s) are developed and implemented in accordance with Systems Completion Specification.10. Use the Completion Management System (WinPCS) for instrumentation and control equipment and systems completion and certification.• Assure that work & documentation pertaining to the Erection / Pre-commissioning activities in a dossier arranged by equipment/sub-system, which shall contain all information required to demonstrate that an Equipment/system is ready for commissioning status.• Assure that all the obligations of the contractor that include complete construction/erection, Pre-commissioning, Commissioning, Performance Guarantee, Supply of Spares and consumables, submission of Project Dossier are met before issuing a Provisional Acceptance Certificate. Minimum Requirements:
• Bachelor of Science Degree in Engineering
• Working knowledge of Oil & Gas practices, processes, and expectations with respect to instrumentation and control equipment systems completions and commissioning.• 10+ years’ experience in Oil & Gas processing • Exposure to drilling and downhole operations.• Direct “hands on” experience in plant/system start-up.• Working understanding of Project completions and commissioning practices.• Excellent interpersonal skills with the ability to interact effectively with project personnel.• Good facilitator with the ability to build consensus in areas of contention while enhancing working relationships.• Ability to work in harsh environments and in stressful situations.• Proficient in Microsoft Office suite of software programs.